• Cleaning your deck every spring, including the underside, it is important to help him last longer.
• If you do not clean the lower side, mold and mold can be built and jeopardized the integrity of the deck.
• You can clean the underside of the deck with a knit solution for cleaning or pressure under pressure.

Cleaning the deck is necessary to keep it in good condition, but if you ignore the lower side, you may find the deck starts weakening and can be rotated from below.

Cleaning the underside of the deck, as well as gaps between planks, it is not difficult and should not be long-term. Ideally, you need to clean the underside of the deck at the same time as cleaning the top of the deck to ensure that the whole structure cleanses and without molds, molds and other harmful waste.

Discover what you should clean the underside deck, which happens if you don’t and how to do it.

Why do you need to clean the underside of the deck

Typically you will clean the deck more often than any other type of maintenance, so you should at least once a year, rinse, apply the cleaner and clean the top and bottom of the deck.

“Cleaning the underside of the deck is required to prevent problems and take advantage of most of your daily outdoor space,” says Dave Kile, the owner of the IBP, LLC. “Depending on the type of deck you have both wood or composites – you can do your own deck cleaning solution.”

Want a more home advice and inspiration of reno project? Sign up for our free daily newsletter for the latest needs for TOS, Reno and more!

What happens if you don’t clean the underside of the deck?

In general, the deck should be thoroughly cleaned at least once a year, although it is a good idea to sweep deck every often to release the dust, leaves or other debris that may have fallen.

If you clean only the top of the deck and forget to clean the lower side, it can lead to various problems, which can weaken the structure and make the deck less attractive for regular use.

“Over time, mold, mold, algae, grame and other elements create accumulation under your deck and in your boards,” says Kile. “If left untreated, this accumulation can capture moisture, which leads to rot wood, structural damage, and even infected pests.”

How to clean the underside of the deck

Clean the area

Before you start cleaning the deck, remove all the items you can sit on deck or stored below the deck.

Similarly, if there are nearby plants you want to protect, cover them with a plastic cloth drop.

Remove loose dirt and debris with a broom or blowhole

Get rid of any loose debris, such as dust, dirt, leaves or even fitters using a broom or fan sheet.

“While doing it, you should look for loose fasteners, damaged wood or other potential items that need repair and take care of that first,” Kile says.

Rinse the underside of the deck and mix the cleaning solution

Spraying the underside of the deck with a giant hose will help remove any remaining debris that may have been missed with a broom or blower. This step also helps prepare the surface for the cleaning solution.

“Use two gallons of hot water, two cups of oxygen heapers and a fourth cup of soap from eating (without ammonia),” says Kile, specific to a tree boat.

For composite ship’s floors, it recommends one cup of white vinegar, a gallon of hot water and one quarter of a baking cup.

Apply the cleaning solution

Once the bottom of the deck is rinsed and the cleaning solution is ready, you can start applying the solution to the underside of the deck. Although it may be a little more consumed, the best results are usually achieved by using a peeling brush, a soft sponge or a slight sprayer to apply cleaning solutions.

“If you use a home cleaning solution, avoid applying it with a washing machine or a touch washing machine because uncralled granules can cause trap,” says Kile. “While applying a solution, use a generous quantity and cut it in the washer.”

Handed stubborn stuck grame

After applying the cleaning solution, you can notice several areas that look especially dirty or which can have pieces of stuck grinders. Using multiple cleaning and cleaning solutions and cleaning the hard brush brush can help remove any stubborn dirt, mild coloring and grime.

Clean the underside of the deck

Make a cleaning solution for about 15 minutes for work before you rejoin the garden hose. Use a spray nozzle to direct the flow and increase water pressure.

When you are ready, spray the underside of the deck to cleanse the dirt and dirt that has built during the year. If you find any points that still require additional attention, repeat the previous step until you are satisfied with the results.

Replace items after drying deck

The deck will be woven immediately after cleaning, so you will need to wait until both the upper and bottom of the deck are completely dry before you can replace any items you removed.

This will usually take several hours, depending on temperature, humidity and current weather conditions. Once the deck is dried, move these items back to the original place and dispose of any cleaning or products tool.